Blast Shot
Blast Shot Shot is a small (usually steel) components used as the raw material and consumables of the shotblasting machine. Blast shot shot is the cause of the cleaning and rust in the shot of the shot. In other words, the shot or shot is a metal bullet that is thrown into the surface of the metal parts by the shot blast to clean them. The shotguns in the blasting machines spend their energy by throwing it into the desired piece and clearing surface contaminants.
In the past, sand was used instead of steel shot shot and cleansing was called metal sandblasting. But over time and with the advances in the production of parts, the need for steel shotguns also increased. The reason for this was the production and casting of metals that had high wear and resistance. These components gradually needed surface cleansing, but the use of sand particles was not suitable for cleansing and rusting. For this reason, steel shot shot replaced its sand type. Blast shot shot is completely clean and safe in addition to higher abrasion power.
Steel shotgun
The bullets used in the shot Blast process, also known as Shot, may be the most important part of the process. As mentioned earlier, spherical steel shotguns or pellets are used to clean the surfaces of the parts. Blast shot shot can be classified according to their standard and international sizes. For example, one of the most important standards in this regard is the SAE J444 standard. According to this standard, the shot shot is divided by size and diameter.
The need to apply the shot shot is to have good mechanical properties. If the mechanical properties of the aforementioned shotguns are satisfactory, they can be used repeatedly without losing their ability. For this reason, precise control of the chemical composition of the shot shot is very important. Usually, the chemical composition of the shot shot shot after production must be controlled by chemical analysis devices.
, for example, high -use carbon shot shots that are highly used in the industry, except the iron, which is the main element of the hosts. Carbon weight, 0.5 to 4.9 percent of silicon, 0.5 to 4.3 % manganese and very small amounts of phosphorus and sulfur. The precise determination of the chemical composition of the shot shot shot allows us to make it difficult. As a result, you can use shotguns up to a thousand or more before replacing.